Ponds Nitrogen Cycle
Posted on: February 01, 2014 by Aquascape Inc.
Understanding Your Ponds Nitrogen Cycle: You may already know some basics about your pond like you know it’s important to include a good balance of aquatic plants and fish in your water garden. You also know simple maintenance is important too, like removing decaying leaves in the fall or cleaning the pond in the spring. What you may not fully understand is why these things are important to maintain water quality and clarity.
Good News! You don’t need a degree in environmental science to understand the cycle of nature that can influence the health of your pond.
The nitrogen cycle might be one of the most important cycles on earth because it’s the building block of all organic life forms. This is an important cycle to know and understand because it can help answer a lot of unanswered questions you might have regarding fish health and the water quality of your pond.
The Process The nitrification process or nitrogen cycle is a biological process that changes ammonia (NH3) to nitrite (NO2), and then to nitrate (NO3). The amazing part of this cycle is it can start at multiple points and has the ability to go backward and forward in the cycle, allowing for a variety of complex biological processes to occur. Unfortunately, the nitrogen cycle makes most of us scratch our heads, so it’s our goal to help you understand this critical, biological cycle. Warning; a little knowledge goes a long way. However, some new pond owners worry about the many forms of nitrogen in the pond and start altering the water chemistry in hopes of creating the perfect aquatic environment or ecosystem. If the pond is designed and built properly (by Clearwater Ponds) and you clean the debris out of your skimmer on a regular basis, add bacteria, and trim dead aquatic plants you’ll have no problems and you will have allowed this complex cycle to hum along as it was designed to … in perfect balance.
Nitrate Producer – The Air, the Rain, the Pond Basic nitrogen gas (N2) makes up approximately 78 percent of our atmosphere. This form of nitrogen is inert and cannot be used by plants and animals. It makes its way into the pond via the rainwater and takes a great deal of energy to convert it to a form that is usable to plants. Nitrogen gas returns to the atmosphere when it leaves the pond through the evaporation of pond water.
Ammonia Eater – Ammonia Nitrification
The large amount of surface area both on the surface of the biological filter media, as well as the rocks and gravel inside the pond allows for the colonization of beneficial bacteria that are responsible for the nitrification process, changing ammonia to less toxic forms of nitrite and the usable form of nitrate. Regular addition of beneficial bacteria such as Aquascape Beneficial Bacteria for Ponds helps support the reduction of ammonia.
Nitrate Eater - Aquatic Plants’
Nitrate Nitrate is either absorbed by aquatic plants or, in anaerobic conditions; it goes through the process of de-nitrification, which changes the nitrate back to nitrogen gas. Although uncommon in ornamental ponds, nitrate can also be removed by small frequent water changes if unusually high levels are detected in the water.
Nitrate Producer – Rain and Lightning
Nitrates can also be added to your pond by way of atmospheric fixation. This occurs during lightning storms when nitrogen gas is broken up, allowing it to combine with oxygen-forming nitrogen oxide which is dissolved in rainwater. This is why our lawns become so green following a lightning a storm – it not only receives water, but also a burst of nitrate (fertilizer). This is also why ponds can turn murky or have an algae bloom after a storm.
TIP: If you add some liquid bacteria such as Aquascape Beneficial Bacteria for Ponds immediately after the storm, you can counteract the influx of nutrients.
Ammonia Producer – Fertilizer Runoff
This is important: Be conscious of the amount of fertilizer you use around your pond. During a heavy rain or over-irrigation, the fertilizer, which is made of ammonia and phosphorus, could wash into your pond creating an algae bloom, water quality problems, or even killing fish and invertebrates.
Ammonia Producer – Dead Plant and Animal Debris
Organic debris like leaves, lawn clippings, and dead fish or insects will break down, forming ammonia as a byproduct, starting the cycle of de-nitrification again. Reduce the amount of plant debris in your pond by using a skimmer filtration system and removing plant leaves and debris before it enters the pond. The use of protective netting helps reduce leaf litter from entering the pond in the fall.
Ammonia Producer – Fish Food and the Resulting Waste Most of our ponds have fish in them.
When the fish are fed, the result is a combination of un-eaten fish food and fish waste. Both contribute to the ammonia level in the pond. Don’t feed your fish more than they can eat in a few minutes. A high-quality fish food is also very important. We carry fish food that contain probiotics that help fish utilize more food, thereby reducing fish waste and actually help break down waste and other organics found normally in the pond environment.
Ammonia Eater – Oxygen
The waterfall in your pond is not just beautiful, it creates oxygen necessary for efficient nitrification. This oxygen is also necessary for the survival of your fish.
Hopefully you don’t feel like you were just watching “The Big Bang Theory” and you can don your new-found knowledge of the nitrogen cycle and feel better equipped to keep your water garden in tip-top shape. Your fish and plants will thank you for it!
Want more information, or more knowledge about your specific pond come to Clearwater Ponds store at 755 Griffith Court, Burlington, Ontario, L7L 5R9. Happy Pondering!
That's right! We are open Monday to Friday from 10am to 4pm and our technicians are ready to...
This Saturday, October 14th is the last Saturday we will be opened for 2017!
Come in and...
We're so thankful for your continued support and the loving Water Feature community that has...
- View All